Configuring RADIUS Packet Retransmission
You can configure the device to resend packets to the RADIUS server if no response is received from the server. This functionality is applicable to RADIUS-based user authentication and RADIUS-based accounting.
|
➢
|
To configure RADIUS packet retransmission: |
|
1.
|
Open the Authentication Server page (Setup menu > Administration tab > Web & CLI folder > Authentication Server). |
|
2.
|
Under the RADIUS group, do the following: |
|
●
|
In the 'RADIUS Packets Retransmission' field (RADIUSRetransmission), enter the maximum number of RADIUS retransmissions that the device performs if no response is received from the RADIUS server. |
|
●
|
In the 'RADIUS Response Time Out' field (RadiusTO), enter the interval (in seconds) that the device waits for a response before sending a RADIUS retransmission. |